OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Chainsaws and Concrete Cutters Petrol Chainsaws and Concrete Cutters Bahramshahr Chain Saw

Hi All,
I am after some info about a Bahramshahr 4500 Chain saw, particularly an exploded drawing of the parts.
Even the manufacturer would be a help, cannot find anything on the saw, all I know is that it has the GS stamp to say it is up to German and EU standards.
Any information will be greatly appreciated.

Thank you
Grizick

One of those Ebay cheapies??

A picture of the machine might be a great help.

I agree, I've personally never heard of the brand.

What carby does it use, we might at least be able to help you there.

Yes it was an Ebay job, not using it for professionals stuff, just to cut a bit of fire wood for the house. I have hasd it 3 years, it has cut about 20 tonne of fire wood and I have never had a problem with it. I pulled it down like I normally do after ever second use to clean and sharpen etc, I did this a couple of months ago, I then had to go into surgery for cancer, I was effected by the anesthetic, had a very bad reaction to it and now I have lost some memory, I have put most if it together, just having trouble with the carby and a rubber that goes with it. The saw is a sthil look alike.
I will take a pic of the carby and post it.
Thank you for the help.

I have a couple of similar chainsaws.

I have found a parts manual online that might be helpful for you and if that fails, let me know which rubber part and I'll tell you where it goes.

If I can work out how I may be able to post photos showing you where it goes..


Here's the link:- http://www.manualslib.com/products/Zenoah-G451-G4500-554877.html

Cheers

Steve

Steve, those were the only two posts Grizick ever had, and he hasn't logged on in more than 2 years. I recommend that you don't respond to posts more than a couple of months old unless they are from a member who logs on or posts regularly.

I'll close this thread, which I should have done at least 18 months ago.