OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Engines Questions On Victa Two Stroke Engines 7 year old victa over revs 2 stroke

my 7 year old victa over revs, as soon as i start it; i had it fixed 2 years ago, same fault, they replaced something, now its doing it again.... any help ?

Hi bassman, BTW, do you play bass? I used to in my band....

Getting back on track, we would like to give you a big warm welcome to the forum; We hope we may be of some help.
To enable us to help; we need the correct name and model of your machine, and what part was replaced last time?

Thats what I was thinking drj

its a victa hawk i think its a 160 motor part number on carb is cro3604a its plastic cant find any other numbers ? if that helps cant find recept of last repair to see what was replaced i know it was in the carb just cant think of part name ? maybe rev limiter

If it were inside the carb, possibly the diaphragm has sucked in a bit and it is suckin air in.

I agree with you Joe.

pulled carby off last night diaphragm not sitting right pulled in slightly on one side will clean up carby put together and test do i need to seal the diaphragm with any thing or will the cover just hold it in place ? thanks for all your help off to tinker in the shed

The diaphragm should be held by the lip around the edge of the carby, no sealant neccecery.

It would very worth while running a repair kit through it while you have it apart.

Just remember what order the parts go in and you should be right

cleand up carby and put back together and all is good thanks guys not much to these carbs .

Hi Bassman, good to see you got it sorted.