|
0 members (),
1,468
guests, and
1,142
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jan 2016
Posts: 8,199 Likes: 233
SENIOR TECHNICIAN
|
Ok this one is hurting my head, I think it is a 375 Briggs, but I can't get any spark on it. Tried 3 coils, no spark and the last coil I fitted I just pulled off a motor that had spark. I have the kill switch wire disconnected. In desperation I fitted another magneto flywheel, still nothing and tried several known spark plugs. Any thoughts?
|
|
|
|
|
Joined: Dec 1999
Posts: 5,433 Likes: 36
Repair Junkie
|
NormK, The problem could be one of the following: 1. Earth wire from the coil to the kill switch might be earthing out on the engine cover. 2. You might not have a good earth on the coil (clean with emery paper where it bolts on). Try looking at these things and let us know what you find. 
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Jan 2016
Posts: 387
Apprentice level 4
|
Norm have you tried a good known plug and lead? These have given me grief.
This Is going straight to the pool room.
|
|
|
|
|
Joined: Jan 2016
Posts: 8,199 Likes: 233
SENIOR TECHNICIAN
|
Slash I have tried 3 different coils and the last one I tried, I took it off another motor that I checked it and the spark was good. Several plugs that I know work and I have the kill switch disconnected from the coil. Over the years I have done hundreds of these but I haven't struck this problem. I will have one more crack at it tomorrow and if I do no good I will put it aside and move onto something else
|
|
|
|
|
Joined: Jan 2016
Posts: 8,199 Likes: 233
SENIOR TECHNICIAN
|
Ok I now have spark but what really annoys me is I don't know what the problem was, that is very frustrating, as Bruce suggested it must have been an earthing problem, only thing I can think of. Thanks again for the suggestions
|
|
|
|
|
Joined: Jan 2015
Posts: 1,548 Likes: 25
SENIOR TECHNICIAN
|
You weren't installing them upside down were you? I know this can be done on some coils.
|
|
|
|
|
Joined: Jan 2016
Posts: 8,199 Likes: 233
SENIOR TECHNICIAN
|
No I wasn't installing them upside down AVB, they have the earth kill switch spade fitting and it would stand out like the proverbial if it was on the top
|
|
|
|
|
Joined: Jan 2015
Posts: 1,548 Likes: 25
SENIOR TECHNICIAN
|
Just a thought NormK as I have seen it done.
But you give the definition of "proverbial" as I am not familiar with that word. I think it is something like as saying "If it was a snake it would have bit me".
Last edited by AVB; 15/11/16 09:11 AM.
|
|
|
|
|
Joined: Jan 2016
Posts: 8,199 Likes: 233
SENIOR TECHNICIAN
|
AVB, you got the message probably Aussie slang, I would think that most here would know exactly what something standing out like the proverbial means 
|
|
|
|
|
Joined: Nov 2013
Posts: 693
Qualified Senior
|
AVB, it's aussie slang for standing out like that which is clearly visible when looking at the rear view of an uncastrated male dog.
|
|
|
|
|
Joined: Jan 2015
Posts: 1,548 Likes: 25
SENIOR TECHNICIAN
|
Ah got it. We use a terms like this. Actually there a lot terms use like this then. Here's one. Standing out like a sore thumb. And the previous comment also works sometimes too. It most means it should have been obvious just was overlooking the problem. It sorta like looking for a pen that is laying right in front you. 
Last edited by AVB; 15/11/16 06:21 PM.
|
|
|
|
Forums144
Topics12,736
Posts106,718
Members18,002
| |
Most Online40,124 Apr 13th, 2026
|
|
|
|