OutdoorKing Repair Forum Forums Repairs and Maintenance Questions On Ride On Mowers Questions On Victa Ride On Mower Frames 1989 VICTA PRO 12 PTO Electric clutch set up.

Hi the 1989 victa pro 12 i have rebuilt from the ground up, the PTO electric clutch has been pulled down some time ago( don't know by who). I have reassembled it to the best i can see how it went together. There is supposed to be an air gap between the clutch and the magnet.(?what is the measurement) next i can see when it is disengaged it should drop down fractionally to supply the air gap, when i put in the main bolt to hold it all together to assemble it it seems to do up too tight and closes up the air gap and constantly is spinning i have not had the electrically connected yet only to test the magnet. Does anybody know what i need to set this up for correct installation. Thanks for all of your help and advice in advance.
Leshby

I was of the understanding that the electric pto clutches are non serviceable units. IE: to get it apart you have to destroy certain elements of it. I could be wrong.


Pics would be great.