OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Engines Questions On Tecumseh / Kirby Engines Need help identifying this Tecumseh carby

Hi guys,

Trying to get one of my mowers up n running and wanting to rebuild the carb, but having trouble figuring out what carby I have so I can find a rebuild kit.

The mower says

VICTA TVS90 - 46114E




Stamped on the carby it reads: 1651F8C ... but I can't find anything on a 4 digit carb.







http://www.tecumsehcarburetorguide.com/carburetor-identification/

Reading through here, http://www.mymowerparts.com/pdf/Tec...YCLE-L-HEAD-FLAT-HEAD-ENGINES-692509.pdf

there seems to be a few versions, though I think this is closer to a series one.. then again my carb seems to have a removable plastic cap covering an adjustment screw.


Any help would be super

Here's a list that includes the higher four digit model codes - http://outdoorpowerinfo.com/engine_specs/tecumseh_carb_mfg_no.asp

But it only brackets your model! However, it's pretty likely that the part number listed for both #1650 and #1652 will fit.

That's P/No 632795A - so just search for 'Tecumseh 632795a' on FleaBay. Plenty of cheap clone carbies out of Hong Kong and China there.

Thanks Gadge

Looks like that P/no is for a whole carb replacement, though I think I only need a few bits for it, such as rubber seals/o-rings, washes etc.. i did come across this though,

http://www.ebay.com.au/itm/Carburetor-Carb-Repair-Rebuild-Kit-632760B-For-Tecumseh-HMSK-HSSK-LH-OH195-OHH50-/141952857816?hash=item210d0cb6d8:g:uyoAAOSwz2lXByq0

Looks like it has much of the pieces I need, though not 100% sure if the main Float Bowl Gasket is that same circumference.. thinking I'll grab that being 1/4 the price of the carb.. thoughts ?

Well, the carby is really the 'Achilles' Heel' of Tecumseh engines. And OEM parts are very thin on the ground now.

If you read a few of the threads in this section of the forum, the prevailing ODK attitude is to just replace the entire carby. Just watch the fuel inlet elbow material on the aftermarket carbies - I'd avoid the plastic ones.

That kit doesn't look like the right one for a TVS90 engine. This webpage has useful info on OEM/aftermarket part numbers for these kits: http://www.psep.biz/store/tecumseh_carburetor_kits.htm

The carby part number is 632795A below is a breakdown of it which you could order the parts from the [b][color:#FF0000]ONLINE STORE[/color][/b] :