OutdoorKing Repair Forum Forums Finding and Swapping For Sale Reel and Bottom Blade Sharpening in Perth

Hi All,

Forgive me if I've posted this in the wrong category but I just wanted to put it out there that I am equipped and experienced to sharpen reel mower cylinders and bottom blades/bedknife for the good people of Perth (and others from far if travel or postage is not an issue).

I am a qualified diesel mechanic but got into the sharpening game as a side gig meaning I do this outside of normal work hours (6pm-11pm weekdays and weekends). There is something about binging an edge back to life that does it for me.

Sharpening of cylinder and bed-knife is done off the machines so I would need them removed. If you don't have the know-how to be able to do this yourself then that if fine because I can do that for you also...it will cost a little bit more though.

Currently my prices are:

*Cylinder sharpen only - $40
*Bedknife sharpen only - $25
*Cylinder and bedknife sharpen - $60
*Remove, sharpen, refit and set cylinder/bedknife - $110

I hope to hear from you.

Mo,

P.S I've included some pictures to give you an idea of what I use to do the task. Hopefully it attaches.

My contact details can be found on my website Edge of Kenwick. The site is not yet complete but the contact details are there.

Mo,