OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Trimmers and Brushcutters Two Stroke Trimmers & Brushcutters Victa tornado whipper snipper problem

Hi guys I have a victa tornado 2 stroke whipper snipper which isnt running right. Had it for over a yr and been great to use so far,so heres the problem. It starts perfectly,on cold or hot start, at idle fine.when i rev it,it just bogs and stalls or starts to struggle as soon as the head starts to spin and turn off. I have put a fresh batch of fuel with oil aswell,new spark plug and no difference. My last use had no sign of any issue and was working perfect. I dont know what to do next and was hoping to get some opinions or advice. Any help would be great.

Just wanna mention aswell,took the fuel tank out and fuel strainer was clean.

Take the exhaust off and try it quickly ( it will be loud) I suspect either a blocked exhaust (easy fix) or a carby issue ( not as easy)

Ok thank you for that and will try the exhaust off now and report back.

Took the exhaust off and still no change.( werent wrong on being loud.haha) So im assuming as mentioned its carby next. Anything i can do or do i need to take it to a expert.

Just for future referance,i have it all running good as gold now. I just remove the carby and cleaned out ever port and refit back,started it and reving and back to cutting grass :)

Thanks for letting us know, I hope all is good now.
I will now close this thread,
If any member has anything to add, just PM a moderator.