|
|
|
0 members (),
3,203
guests, and
424
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Oct 2011
Posts: 126 Likes: 1
Apprentice level 2
|
My tac has me stumped replaced decompressor, ignition module, checked the top seal and replaced the fuel today and it still starts first go runs for about 1-2 mins then cuts out without revving high first so I cleaned the coil armatures and regapped the coil to flywheel and still does it any ideas?
What the hell, it runs!
|
|
|
|
|
Joined: Jan 2013
Posts: 956 Likes: 20
Moderator
|
I know you said it doesnt rev high before cutting out and i assume it starts up again without a problem so before you get into changing coils and modules again try isolating the cutoff wires in the carb and see what happens. if it still persists check your float level(sometimes the shorter needles help, or just file about 1/2mm off your existing one). Another stubborn problem is sometimes the fuel cap is not venting properly(loosen it up and try again).
|
|
|
|
|
Joined: Oct 2011
Posts: 126 Likes: 1
Apprentice level 2
|
I disabled the cut off still did it I checked the float and needle too maybe ill file some off and I'm certain I checked to fuel cap a while ago. It seems to be fuel related cos it will start straight up after you prime it again
What the hell, it runs!
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,009
Posts106,964
Members17,637
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
