Finally got back into doing some more work on the SB after the hectic holiday period. I'm deciding to put some parts together before I move along as I'm running out of space and painted restored parts are in the way getting knocked around. I'm looking at assembling the rear roller and was wondering how it should be lubricated? I'm guessing the end roller bearings should be greased as well as the roller shaft and out and inner roller bores of each roller. The other thing I'm not sure of is if the middle clog type mechanism between the two roller on the shaft needs to be greased where the 3 pins lock in on each side.
Also should the thrust bearing in the clutch be oiled or greased? Pretty sure the self aligning bearing on the clutch shaft sproket needs to be oiled.
