OK, so had a bit more of an investigate of both mowers tonight (wife out and kids asleep!)
Started the Kirby and took a quick vid. This was from stone cold and no pulls yet. I'm finding that I couldn't get it to run with full choke or no choke, it had to be 45 degree angle or nothing.
Kirby motor starting and running - HERE I took the chain cover off and unfortunately, one of the chains was missing
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/02/full-11170-33216-00000img_00000_burst20170227194806_cover.jpg)
But wait, what's that hiding in the chain cover?
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/02/full-11170-33217-img_20170227_194929.jpg)
Pictures of the gears
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/02/full-11170-33218-img_20170227_194731.jpg)
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/02/full-11170-33219-00000img_00000_burst20170227194723_cover.jpg)
Also took some pics of the other gearset on the twin rail. I did some initial investigating and I'm *thinking* I may be lucky with the rails, not counting my chickens yet though.
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/02/full-11170-33220-img_20170227_202214.jpg)
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/02/full-11170-33221-img_20170227_202201.jpg)
And in regards to the black handle plate, perhaps this will help you figure out what happened. I definitely know!The handles are also quite... aluminiumy!
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/02/full-11170-33222-img_20170227_193014.jpg)