Here is photo 2.

[Linked Image]

Having timed the points as best I can, and checking a good spark from the 'removed' spark plug, I put the engine back into the frame. It still doesn't fire. I removed the plug and it looks wet, and smells of petrol.

When I dismantled the engine after it not starting before, there was quite a bit of fuel in the crank case, so i am pretty sure it is getting through. I am starting with an electric drill. At first no choke and no throttle, then while turning added choke, then throttle. Nothing!!!

Any ideas?

Cheers, Camerart.

Attachments
J.A.P. 2.jpg (298.62 KB, 15 downloads)
Last edited by grumpy; 01/12/13 06:19 PM. Reason: Regularize image