Hi all as most of you know I'm currently working on most of my VC-Mustangs.Now I have hit a hurdle.I don't have all the bits I need.The only problem is I don't think they are easy to come by.What I'm after this time is a bracket and the fitting in the tank for the remote tap system.Like these,
[Linked Image]
What these are is the bracket for the fuel tap (Left) and the brass fitting for the fuel tank (Right).
Now I'm not too worried about the bracket as I have a piece of steel here that I'm going to make one out of,unless of-course I can find an original.Lets face it original would always be better.It's more the brass fitting, now I don't think I will be able to find one.Now I know we have some very smart and talented people on this forums,so.Is there anyone that would be able to make this fitting?As I just don't have the tools to do it.
[Linked Image]
As you can see it flares out towards the nut part.Tricky but that piece fits snug into the plastic fitting in the tank.
[Linked Image]
This picture didn't turn out to well.I was just trying to show the thread inside that the filter screws into.
[Linked Image]
This bracket shouldn't be to hard to make.So if anybody has any or somebody can make this fitting please let me know.I'd like them to be how they left the factory line.Then they could go into the restoring line for me to do.Thanks all.

Here for a good time,not a long time.