OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Trimmers and Brushcutters Two Stroke Trimmers & Brushcutters Talon 'Yard Hawk' AT33552 - need parts list

Hi guys,

I have a Talon Yard Hawk AT33552, and need to replace the pull start coil spring, but not sure which to get (part number). I looked at the sticky of Talon manuals, but couldn't see this model listed.

This is the part Im trying identify,





Thanks

Here is the information requested below.

Awesome, thanks heaps Bruce . Where about were they hiding? I had another look here https://www.outdoorking-forum.com.au/forum/u...cutter-parts-list-manuals.html#Post87479 but still didn't see them.

[EDIT] Looking at the parts list, seems to show only the assembly as a whole, and not individual parts that make up the assembly. Looking around, I cant seem to locate either #9228GP0104, or #522344601 (Husqvarna) parts. Do you know if the part in the pics above are universal, or perhaps a part like it from another brand that'll likely work ?

Thanks

Not surprising that parts are no longer available. These curve shafts here are considered disposable units. They are sold a lot of the time below many repair shops minimum labor rates. Even with me @ 45 usd / hr. Spending over an hour making repairs plus parts it quickly exceed replacement. There is a lot of the time I way under charge for my time just to help a senior citizen out. Even then repairs are expensive.

Yes it is possible the recoil spring from another brand may work as Husqvarna didn't make the unit just rebranded it. Now if you got several junkers as I do around here you can try matching up the recoil spring from one of them. But you see even most other OEMs are going to assemblies instead of individual parts.

Just a shame that some repairable equipment dies because a lack of parts but this is intentional by OEMs to force the end user into replacing equipment.

Widget, if you can't get the spring and this machine is just for your own use you could use a battery drill to start it. Refit the starter cover with the starter removed and drill a hole in the cover big enough for the socket to fit through

Here is a link to some universal starter springs CLICK HERE

Thanks AVB. The spring above I found amongst the spares, but I can't make the loop to connect to the starter housing, the spring/wire always breaks real easily. I thought about heating the spring to possibly soften it while I bend it, but I dunno if it'll work like that, or whether too much has broken off already.
Regarding Husqvarna, so the Talon is just a rebranded Husqvarna ? Their parts are likely cross compatible between each other ?



Thanks Norm, I'm a pretty simple person, so I might look into that, but probably as a last resort, lol, thanks .


Thanks Bruce . Do you know if these springs include the dish that the spring wraps in? or can you buy the dish separate?

Hi Widget, I have the complete engine. PM me if you want. I can sell you the pull start assembly or any parts you want.

Thanks Carby, I sent you a pm,