OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Question On Scott Bonnar Cylinder Mowers Another Scott Bonnar 33 project

Its cutting grass again, this 40 year though like a tank machine is quite fast when you apply drive. I have to walk quite fast and need to get used to it. fist time I operated one.:), proud of the engine tuning done by myself, considering I got it cheap because it was not running properly. Very smooth, sounds like a go-kart or a minibike.



Next is sharpen the blades. hope it is not too expensive an kill the project budget.

Cheers

hi guys, I'm trying to get the clutch of my 33 B&S driveshaft with no luck! My plan is to put the motor on my 45 that is in better condition. The posts above don't detail very clearly how the clutch connects to the shaft when there is no bolt / cotter pin. Any help is appreciated

Here's the other pic

Have you tried loosening that nut?,

Hard to see in the photo but the nut is loose and sitting loose on the driveshaft

You need to use a 3 Jaw Puller to get it off the PTO shaft and not use a hammer at all.

Cheers,
BB.