OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames victa id help

hi everyone

i attached a pic of my victa not sure what model it is any info would be good

also where could i get a new side chute for this mower?
and any idea what the cuute would be worth?

thank you - emmo1980

emmo1980

This is same as my side gear - looks like you have a nice new exhaust though. I cannot help with identification, in the same boat.

cool thanks drjbeam

i found the exhaust in my father in laws shed the other day had the reciept with it was brought from bbc hardware carlingford for $11.75 in 1997.

he found it years ago in a rubbish pile.


i have only run the mower for about two minutes with that exhaust


thanks for the info - daniel

emmo1980,

The victa is a Pro 460 model which was made in the very early 1980's the code for the model is WM152A0. It was fitted with the gold colour electronic module. The model's before were fitted with points and condenser.

Hope that this is of some help.

drjbeam,

yes the gasket was there in the bag came with the exhaust

bruce,

thanks for the info about to google it and see what i can find.

- daniel

bruce,

i plan to restore this mower and was wondering if the sticker kits are available and roughly how much would they cost?

also is the chute/flap assembly available and price please.

- daniel

oh and just one more thing any idea what the paint is called or a paint code.

thanks - daniel

What is the correct spark plug to use in this pro 460 utility.

I cannot find any ref to Victa in the application guide.

thanks

Bury,

The correct plug is a chapion CJ8 or an NGK BM6A.

Looking at the photo, it is a standard (and not the pro 460 model) victa utility made in about 1982. Main difference between the standard and the pro 460 is the location and size of the fuel tank. The pro 460's tank is mounted on the handles and is 2.2 litres in capacity whereas the standard utility's tank is 1 litre