Hi everyone,
Basically my father-in-law gave me his father's SB45 14" which was his pride and joy etc. Since then i had the SB completely restored BUT I replaced the engine with a B&S 3.5HP engine basically because it was the easier option and the new B&S engine is superior to the Kirby engine in pretty much everywhere besides being original.
So my father-in-law was blown away by the complete restore i got done but was a little disappointed that i didn't reuse the "sorta" working kirby engine. So it has lead me to think "what should i do with the old kirby engine?" and i then came up with the idea or completely restoring and repainting it and mounting it on a nice piece of timber with a plark and giving it back to my father-in-law as a nice thing for him to display etc.
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/05/full-11324-34309-img_1501.jpg)
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/05/full-11324-34310-img_1502.jpg)
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2017/05/full-11324-34311-img_1505.jpg)
The problem this engine has is it leaks fuel out of pretty much everywhere it can. I would love to fully rebuild this engine but i just don't know where to start and where to get spare parts from. I know Kirby engines are basically rebadged Tecumseh engines with a few minor changes.