OutdoorKing Repair Forum Forums Finding and Swapping Wanted Looking for Southern Cross KXD-2 parts

I wish to buy the following for a Southern Cross KXD-2 mower:

1) An original starter winder assembly. The measurements of the mounting holes are exactly 4" from centre of bolt hole to centre of bolt hole. I will also need a new starter cap as mine has lost its teeth. I am not sure if the one I have now is original or from a different mower. It has the letters "GED 139-2" and "HESS" stamped on the inside of the cap. It measures 3" 1/2 inch outside diameter, and 2" 3/4 inch inside diameter, with half inch centre hole.

2) An original air filter housing. These were a squat cylinder shape and were mounted up on the handlebar.

3) A copy of a manual if anyone can help.

4) A discharge chute/deflector, but I am sure an original will be near impossible to find. If anyone owns one, I would be very grateful for all of the measurements and close up photos so I can make one up that looks close to an original.

Update:

Now have a copy of the manual. (Thanks to Paul.)

Small correction. Starter cap is stamped "GED 139-2" and "1-ESS".

Also would like to know what the original flywheel screen looks like, as it is an odd design compared to other mowers. I can easily make one of these out of perforated mesh, but need to know what the original looked like.