OutdoorKing Repair Forum Forums Repairs and Maintenance Questions On Ride On Mowers Questions on Greenfield Ride On Mower Frames Greenfield Clutch Pulley

Hi all,

Would anyone with an Greenfield "Evolution or Fastcut" series, be kind enough to lift up the seat and from the rear of the mower, confirm if the clutch pulley flange on pic 1 bolts onto the inside or outside of the mower frame Pic2

Looking from the rear of the machine it is the right hand clutch pulley that's in question

I'm 99% sure that it bolts onto the inside, but my mower man shop says it bolts onto the outside

Many thanks
Buckets

I've looked at 2 of my Greenfields & both are on the outside.. A 75 Mini tractor 8 & 84 11/30

Thanks Paul,

I had a look at 3 Evolution series mowers yesterday, including one brand new one and 2 of them were bolted to the inside (including the new one) and one bolted to the outside.

I also found some old pics I had previously taken of my mower, and it was definitely bolted to the inside, so I am perplexed as to why some are and some are not and if it makes any difference.

Regards
Buckets

Tis what it is from memory on the other side the shaft position can be altered by the shaft collar so it doesn't matter which side they are bolted to. What is important it to get the sprockets lined up