OutdoorKing Repair Forum Forums Finding and Swapping Wanted Victa 550 Professional

I'm fixing this Power Torque 550 for a local community organisation, and I'm after a fuel cap (The small, 43mm one, P/N. EN71969A), and a blade disc nut (The stepped nut for a two stroke engine, P/N. EN72534D).
Someone has put a plain nyloc nut on, allowing the blade holder to be running slightly loose. I've fixed the resulting damage, made and installed a spacer so the disc can be tightened, but need the right nut.
The fuel cap when I got the machine was a piece of cloth tied on with baling twine!
Surprisingly, with a carby & spark plug clean, fuel tank flush & new fuel, it goes beautifully.
But I still need these two bits.
Cheers,
Maurie

Here are some links to the parts that you require. Just click the number for a direct link to the site.

EN71969A Fuel Cap Baffle

EN72534D Blade Plate nut