OutdoorKing Repair Forum Forums Finding and Swapping Wanted WANTED Tilliston HC16A carby kit

Hi every one
Pulled the carby off and now im after a Full kit for it as mine is stuffed all together
THE CARB IS TILLISTON HC16A
Let me know if you have one or where i can buy it
Regards Peter

Hello peter92

I hope a member can suggest local supply.
Otherwise you will need to import:

https://www.jackssmallengines.com/Products/TILLOTSON/Carburetors-And-Parts-2-Cycle/Carburetor-Kits

Hope this helps.
------------------------
JACK

Thanks for putting up that link, but already looked there.
And they don't have it.
I think the kit i need is RK-762
Peter

Funny how the HC16A carby is made for a saw in 1966 and my saw was made in 1958 to 60
Im thinking some one may have changed the carby over so if any that has a AH81 please tell me what carby is on it
Judging by the Tecumseh PDF my saw should have a HC7A carby

Noticed the carby kit HC7A is for a 70cc engine and mines 131cc
does some one have another good carby that would suite my saw AH81 chainsaw

I found a Diaphragm by using this PDF and p/n 012475
http://www.tillotson.ie/docs/HC-Series-Parts-List.pdf
hopefully it might help some one else

Hello peter92

Thanks for that.
It may be useful to a member down the track.

All the best.
---------------------------
JACK

No worries Jack