|
1 members (Hillman),
7,487
guests, and
505
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jan 2009
Posts: 6,926 Likes: 10
Pushrod Honda preferrer
|
Hi micka, please post a picture of the governor linkage and spring. It sounds as if there is an assembly error. No big deal to put right unless you allow it to over-rev before you fix the governor problem.
|
|
|
|
Joined: Jan 2009
Posts: 139
Apprentice level 2
|
|
|
|
|
Joined: Jan 2009
Posts: 139
Apprentice level 2
|
|
|
|
|
Joined: Jan 2009
Posts: 139
Apprentice level 2
|
hi grumpy I done the adjustments, also I think because I was using the governor spring of the old 12.5hp I used the governor arm off the 12.5, everything looked a lot better and worked, there was a difference in the two arms
|
|
|
|
Joined: Jan 2009
Posts: 6,926 Likes: 10
Pushrod Honda preferrer
|
Usually you can tell whether the tension on the governor spring is about right, micka, but not until you've been through all this a few times. I'm glad you've got it running properly, and haven't broken anything or wasted a lot of money along the way.
I'll close this thread.
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
Forums145
Topics13,002
Posts106,910
Members17,611
|
Most Online16,069 Sep 18th, 2025
|
|
|
|
|