OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames victa mower model identification

Hi. I'd just like confirmation of model i.d. for my mower. It doesn't appear to correspond to any model on the charts. It comes closest to a V5, with a smiley VICTA badge at the front ,rather than the usual sad badge. Unfortunately, the V5 has a casting coming out of RHS on the base, but my mower doesn't have one - the base is smooth. The engine number is AC 52837.

Terrymac,

Can you post a picture on the board so that we can help you as it will be a lot easier.

Sorry, Bruce, don't have a website to put picture into. However, there are two Victa mowers on ebay - the first link shows the Victa sign on the front of my mower, the second link shows how the right hand side of the baseplate on my mower is smooth. My baseplate looks like the one in the first link, but without the cast channel on the right hand side.

Terrymac,

Ok the second photo is a model 2A Victa.

If you go to help area you can use image shack to store your pictures for upload to the site it is FREE

Here is a picture on how it should look:

OK here goes my first attempt at including a photo



This is my mower. Terry.

Terry,

You need to get some new wheels for the mower which I have (they are after market ones).

It looks like you need a new cap as well from the pic and that is available as well. :Wavey:

If you have a look at the pictures forum you will see one mower the same as yours that people have voted on and it will give you a good idear on how the finished mower should look.