|
|
|
2 members (Dandare, 1 invisible),
1,648
guests, and
1,248
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jan 2001
Posts: 36
Novice
|
I have a feather lite weed trimmer that I was not paying attention when I took off the carb & primer hoses ( this type of unit has the primer bulb attached to the carb housing cover & not on the carb ) & now putting everything back together is when I am stuck. There are two fuel line hoses coming out of the tank ( one is for vent only & the other is the primary with the fuel filter on it ). My question is where do these hoses attach to on the carb & which ones attach to the primer bulb ? Please note: the primer bulb has two outlets for hoses & the carburetor has two outlets for hoses.
Any suggestions/comments ?
Thanks.
------------------
melvincribb@hotmail.com
melvincribb@hotmail.com
|
|
|
|
|
Joined: Oct 2001
Posts: 5
Novice
|
The fuel line in tank with the filter goes to the carb fitting on the carb body.Then the vent or return line goes to the long fitting on the primer then the short fitting on the primer goes to the carb fitting on the outer part of the carb.
------------------
PEEWEE
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,009
Posts106,971
Members17,640
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
