OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Chainsaws and Concrete Cutters McCulloch Chainsaws MiniMac35 carb plug settings?

I cannot find a manual for my McCulloch MiniMac 35 and hope someone can tell me the initial carb settings for the 3 screws, the plug gap, and where the fuel filter can be found, if any. Thanks - Rodonisle@aol.com

Rod,
Carby settings are:
'L' screw you bottom then back off 1 & 1/8 turns

'H' screw you bottom then back off 1 turn

Plug gap 25 Thow

The third screw is the idle speed and this should be adjusted so that when the saw is idling the chain should not move.

I can supply a parts list for the machine just e-mail me under spare parts this site.

Fuel filter is located in the tank and also you have one in the carby as well.

Regards,
Bruce

[This message has been edited by Bruce (edited 08-12-2002).]