|
|
|
0 members (),
4,591
guests, and
236
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jun 2006
Posts: 47
Novice
|
hi Bruce
I cleaned and fitted new diaphram, springs,shoe, and brass contacts..
starts first pull and the throttle control works good, when i push down on the throttle lever for power, it revs to the point where it sounds like it is going to take off.
Springs maybe..???
thanks
regards Frank
|
|
|
|
|
Joined: Dec 1999
Posts: 5,385 Likes: 34
Repair Junkie
|
briggsboy, It sounds like it is an air leak if it is reving really high. If it is a power torque motor check large starter 'O'ring. 
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Jun 2006
Posts: 47
Novice
|
hi Bruce
I put a o ring on and also one where the carby twists onto the block.
still reving for take off...
i know i am missing the ..washer that goes under the cam in the carby. would that course it to rev up for take off.
other than that. the throttle responds good relevent to where the lever is
regards Frank
|
|
|
|
|
Joined: Dec 1999
Posts: 5,385 Likes: 34
Repair Junkie
|
briggsboy, The carby mounting block has two screws holding it onto the cylinder. Is it loose?  If so it also has an 'O'ring behind it. Try replacing it.  We have information on the carby in the Parts list and manual area. 
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics12,999
Posts106,905
Members17,607
| |
Most Online16,069
Sep 18th, 2025
|
|
|
|
|
|
