|
|
|
1 members (MowingManiac),
1,982
guests, and
495
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Oct 2011
Posts: 5
Novice
|
Hi, I am currently doing up an old Rover Ranger 5138 (early tiller steering version). In stripping it down I dammaged a rear drive wheel hub. It is a split hub die cast alloy and has two 10mm locating holes that fit on to two 10mm spigotts on a keyed boss on the rear axle.
I have just overhauled the motor, replaced all the drive chains and bearings and fitted a new primary drive sprocket - when "Murphy's Law" kicked in and I broke this hub.
Can any one help me get the old girl going again?
Last edited by CyberJack; 01/02/16 12:27 AM. Reason: Topic heading.
|
|
|
|
|
Joined: Oct 2010
Posts: 1,819 Likes: 6
Junior Technician
|
|
|
|
|
|
|
Joined: Oct 2011
Posts: 5
Novice
|
|
|
|
|
|
|
Joined: Oct 2011
Posts: 5
Novice
|
Hope these photos help as I have no idea where I can get replacement wheels from - appreciate any help - regards Haynesy
|
|
|
|
|
Joined: Oct 2010
Posts: 1,819 Likes: 6
Junior Technician
|
I have 3 of them mowers here in bits. Wanted to put one back together. Pinch the rear axle out of another and modify it to fit a Colt 8 The other is for parts.
I will have a look how many wheels are there and let you know. I think i recall seeing one broken wheel and the 3rd mower is incomplete, heaps of bits missing.
|
|
|
|
|
Joined: Dec 1999
Posts: 5,395 Likes: 35
Repair Junkie
|
Haynes, The part numbers that you require are A01599 and A01600 but only one is available which is A01599. 
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Oct 2011
Posts: 5
Novice
|
Thanks mate - look forward to hearing from you 
|
|
|
|
|
Joined: Oct 2011
Posts: 5
Novice
|
Hi Rodeobob, Did you find any wheels for me? best regard Haynesy
|
|
|
|
|
Joined: Oct 2010
Posts: 1,819 Likes: 6
Junior Technician
|
Sorry still working on it.
Theres a wheel barrow full of stuff in the shed that came out of the back of the car, havent had a chance to look through it and sort it yet. I wont either until i have made a spot to put the stuff.
Working on that today and tomorrow.
Cheers, Bob.
|
|
|
|
|
Joined: Nov 2011
Posts: 2
Novice
|
Hi Haynesy,I have the same mower and was wondering if you could post some close up pics of the throttle linkages including the govenor arm and carby areas many thanks in advance ps I will keep my eyes peeled for spare wheels 
|
|
|
|
|
Joined: Oct 2010
Posts: 1,819 Likes: 6
Junior Technician
|
I found one. Its a bit dirty but other than that its fine. ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2011/11/full-4181-4229-9stnov_009.jpg) ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2011/11/full-4181-4230-9stnov_010.jpg) ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2011/11/full-4181-4231-9stnov_011.jpg) If you are still needing it, its probably best if you send me a PM with an offer to get the negotiations rolling. Bob.
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,058
Posts107,236
Members17,805
| |
Most Online16,069 Sep 19th, 2025
|
|
|
|
|
|