OutdoorKing Repair Forum Forums Finding and Swapping To Trade Turner Coronet

Hi all I have this Turner 2 stroke mower.Not sure of what it is.It does have a sticker with Coronet on top.Not sure if it means anything.I'm not into the turner brand.It is pictured with only two wheels,but I do have another two to go with it.Just would like to swap for parts or complete victa,around the same age.In one of the pictures you will see a hole in the back of the crankcase.It looks like somebody has repaired before with something.I'm sure it would be repairable.Still turns over.I haven't tried to start it due to hole in back.Picture here.







As you can see the hole in the last picture. I do believe that the broken piece can be unscrewed and replaced.If you could find a replacement part.
Thanks Everybody.

As i said before, I am interested in this one, a little concerned by what may have caused the hole, but as long as it has not spar something, it sould not be a problem.

If you look down the spark plug hole, does the piston move when you turn the crank?

Can you think of anything you have seen in my collection that you may be interested in for this?

Yes piston moves,it is hard to see in there it's dark.There's only one thing that comes to mind. I'd dare say by this time next week I will most likely be desperate for.Also might have two other mowers here form you.I'm running out of room to put them in.

So what is the one you would be interested in?

I thought you would have already known which one.It has a part I'm trying very hard to find.

The VC-160 MKI?

I don't think i could part with that one! Part of my VC-Family!

I thought you'd say that.Well that's ok cause I didn't want the whole mower just the top guard.

Sorry mate, that's just one of the few I have flagged to keep.

Give me a better idea of what you would like, and i'll see what i have that fits.

Victa? 2st? 60's? 70's? 80's?

Well I don't know I don't really know what you have,I mean I don't really want another complete mower.As I said I'm running out of room to store them.Until this shed happens,but that's a big job and another story.At the moment I have some stored in the outdoor area and I've had to bring 3 of my more favourite one's in the house.Now the wife's not getting so happy.So I'm guessing just more stuff to get the VC's on there way.

I can do that, I also have some parts for a Victa Special here, cowl, tank, base, and some engine bits.

I think as far as Victa 18 parts are.I think I'm covered the only parts I need I really don't think you would have only because of the rareness of some of the stuff I need for them now.Just not easy to get them.Unless you have the standard air cleaner with the choke part.I need some of them.Not the small black one's.Got enough of those.

Is that the small one with the white choke, or the large black one that sits further down?

I was more referring to the white one.Although I think, I'd have to look I might need another big one.I can't remember how many I have of those one's.Also I have to go through them and see how many more I'm going to restore.I've started 4,it just got to cold to paint at the moment.

I don't suppose you have a Victa 18 special base without the edger attachment?

Hi fellas, sorry to be a pain in the backside, but we' starting to slide off topic again..this is a Turner thread...

...and that's what all the parts are about.I'm in negations with Ty for some parts in exchange for the Turner 2 stroke.If he has some things that I need then the exchange will happen.

It's Ok Guys, We are in negotiations now, I should have taken this up In PM a while back!

I'll get a list together of what i have to offer, and PM you Jeffery.

Are you able to email a picture, My current phone is pre-pictures (B & W Screen)?

Ok just so everybody knows a deal has done,for this Turner 2 stroke.Thanks for all the input.
Happy Mowing.

I'll restart this one in the approprate area when i begin restoration on it.