OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames Help required to Identify Victa 2 stroke Model

I am trying to identify this modelno 888210a so i can get correct blades. Can anybody help

Hi Corky, and a warm welcome to the forum. It's great to have you on board.We all like to learn new things and tinker here.
So me may help you identify your Victa, can you please post a pic of the machine? Thanks mate.
Once again,

Here are the photos seems my eyes are dim it's not 888 but SSS

Hi Corky, and thanks for posting the pic, I am sure that one of our moderators or members will be able be able to identify it for you.

A picture of the blade disc and someone will tell you for sure which blades.


Id be about 99% sure on it using the run of the mill victa blades. The wider premium ones will also work.


You could buy them on the site in the shop.
Or go into just about any Bunnings and buy them off the shelf.


Cheers, Bob.

Any victa rear catcher 18" blades will suit,they should come with bolts/washers/nuts etc-if not buy a set.metal fatigue in a used bolt if it snaps is not a pretty site...ken

looks like its about a 1996/1997 commando

Hi Corky,

What you have is a 18inch cut victa powertorque.

The Victa part number for the blades with boltset you need is CAO9506S

Without bolts its CAO9306S

I can give you the various suppliers part numbers but afaik you need an account with them.

Cheers, Josh.