OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Question On Scott Bonnar Cylinder Mowers Scott Bonnar 45 clutch

Hi fellas, pls see the pic. In the middle of pulling my SB 17 inch apart to have it sprayed. Is there any secret to separating the sprocket/clutch plate from the clutch adjusting bracket/?? It seems well secured. I dont want to start with some gentle persuasion from a hammer just yet.

Cheers- Ross

Ross,

Below is a picture of the parts list regarding the clutch that will fill you in on how it is assembled. This will help with the removal because if you have removed the centre bolt (which you appear to have done) then the sprocket should slide off without to much trouble providing you have removed the roll pin.

from your image you will need to gently pry the clutch plate between the sprocket and the rectangular piece of steel.

thats how i separated mine when i did the restore

Bruce/ Tezza, thanks- worked a treat.

cheers-Ross

Since this post is over 12 months old, I will now close it.