I will try to locate the owners manual for the model you are after but will be no guarantee that it available because the manufacturers website does not have it listed and I will have to try and locate a hard copy to scan.
Regards,
Bruce
Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
Thanks for that Bruce, i did look at the rover website and as youve said it doesnt have one there, im after part no.A06000 driven wheel, would you have one? the mower wasnt moving in 3rd gear so i lowered the big wheel connected to the motor ( i guess it has a proper name lol)onto the driven wheel and everything went well i spent an hour cutting in the paddock untill i totally lost 3rd gear again, on looking at the driven wheel i was shocked to see it was now only about 6mm wide as opposed to about 20mm beforehand!! thanx for a great website and your assistance regards Kevin
I may have one outside somewhere here, i have a whole machine that is no good to me since it is missing the friction disc on the engine as well as the engine itself
Hi willowbrook, Great to see that you have it all sorted. Have you been able to get the manual you are after?
Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member. Kindest Regards, Darryl
had no luck yet with the manual, one appeared on ebay little while ago, but i wasnt there at the end of the auction and of course someone outbidded me right near the end! typical!!