OutdoorKing Repair Forum Forums Repairs and Maintenance Questions On Ride On Mowers Questions On Ride On Mowers Frames white ride on

Hi fellahs i was wondering if any one could help me assist an elderly chap down my street who has a white ride on mower. We live in a small country town and my neighbour had to take the unit for repair. A drive belt was replaced half a litre of oil added and $237.65 thank you very much. i need the info on what belts are fitted as after 43 yrs on the road in a service van in melbourne there are not too many bearing shops i wouldnt have attended so i am able to get good quality belts at better than trade. apart from the obvious (decal plate ) am i looking for letters- numbers stamped into a frame somewhere. what other details are needed . Thank you hayesy

HAYESY,

Once you get the model of the ride on we could quote you the part number you need and it is just a matter of going to the online store and putting the genuine number in the search box and you will get all the info that you need.

You should be able to locate the model number under the seat.

thank you all will endevour to get details in the next day or two
thanks once again hayesy

hello gentlemen i have finally managed to catch up with my neighbour and checked out his macine . the details i have found are White R-126 12 Hp Briggs & Stratton Serial No 35-031-9071
any help would be appreciated . Thank you hayesy

We require both model number and serial number:

hi gents i have finally managed to contact my old neighbor checked his unit as suggested by bruce. i found a small adhesive decal with faded print on it. i am pretty sure the details are 131551c672----------Do1161. i hope this helps. if it does please advise on the procedure to obtain details from a manual. thank you Hayesy

We need the serial number as well if you can find it.

Maybe my thread is of help with the ID?

its got some piccies as well.

https://www.outdoorking-forum.com.au/forum/ubbthreads.php?ubb=showflat&Number=14920#Post14920