OutdoorKing Repair Forum Forums Repairs and Maintenance Questions On Ride On Mowers Questions On Victa Ride On Mower Frames VICTA 4012 GXT

Hello, I am of New Caledonia, I seek the diagram d' installation of the belt d' driving drive + reference belt for the VICTO 4012 GXT. I can pay the 15.00 $ but with credit card. Say me how to make - d' advances thank you

douay,

Below is picture if the belt setup.

not - what I seek c' of driving passage of the belt mercy is the diagram
thank you

douay,

Below is the drive belt pic.

OK - merci beaucoup
Pour avoir la notice technique compl�te ?
En payant par Carte bleue

thank you

Bruce, in case your French is even worse than mine, I believe douay just asked how he can obtain the full manual by subscribing to that section of the board - he would like to pay with a credit card known as the blue card.

BONJOUR,

C' is well that my question =
- the technical note with nomenclature of the parts for VICTA 4012 GXT.
- how to pay with a credit card (in $)

Thank you to answer me

douay, your English is considerably better than my French. It sounds to me as if you are looking for an illustrated parts list for your 4012 GXT.

Yes Grumpy, my English is that of " Babel fish - yahoo!)
I' have a problem with l' driving drive and l' clutch.
I do not know the exact length of the belt engine (meter) and if there is an adjustment for l' clutch + brake?

I do not know the answers to those two questions. The operator's manual should show how to adjust the drive belt. It is probably available in the manuals area of this site, once you solve the credit card problem. Does your existing belt have a part number printed on the outside of it? If it does, you could compare that number with the correct part number, which Bruce would have. Measuring belts with a tape measure is possible, but just barely.

The belt part number that you require is 37X87 and if you type this into the search box in the online store it will come up with belt sizes as well as a description.

This being a Transmission belt will not be uploaded for another two days, so if you can wait you will get the information you require.

Note that this ride on mower is made by Murray for Victa so the parts will be listed under Murray at this time.