OutdoorKing Repair Forum Forums Finding and Swapping Wanted Replacement fabric Victa catcher

Somebody nicked my catcher off the back of ute. Need a replacement fabric catcher for Victa Powercut 82 Volt 18" Mulch and Catch. Where can I source one?

Hi vint_mow,

Any Victa dealer should be able to help you with the catcher bag.

Hi Bruce, They cost an absolute fortune. I was quoted $145 from local Victa dealer. Think I will keep an eye out at local tip shop.

Hi mice-elf, I'm not sure what you are referring to as the link has been removed.

Hi VM

If Bunnings still sell your model you could ask them for a price on a catcher.


How to do it at Bunnings:
Don't just look in the garden aisle: Go straight to the Special Orders Desk (usually near the entrance or front registers).

Bring your Model Number: This is crucial. For an electric Victa, look for a sticker on the deck (near the back flap or on the side). It will be something like PMA1840 or MEE1840.

The Process: Ask the team member to look up the Spare Parts Manual for that model. They can then order the catcher assembly (sometimes the "mesh bag" and "frame" are separate parts, so make sure they order the whole thing).


I've never had to buy one as I just modify one that is a close fit and get it to work.

Cheers
Max.

Same price unfortunately. Thanks Max, I'll keep an eye out at the tip.

Yes it cant be that difficult to find a catcher as it looks the same as a Sanli catcher.

Sanli catcher is $57. new.

Yes, I suspect it is a bit of a rip off and other catchers will fit. There are "universal" ones on ebay, but it is hard to tell if they will fit or not. Possibly all made in the same factory in China. We often pay a lot more simply because a brand name has been stamped on it.