OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Trimmers and Brushcutters Two Stroke Trimmers & Brushcutters Tanaka TBC2251

Hi all.. I have a TBC2251 that has an annoying vibration in the tube... i removed the flex shaft and it persists.
The clutch drum has a little movement and the bearing may be the issue..
Q.. can the bearing be replaced or is it moulded into the housing ?
Ken.

Hi kenny_t ,

You should be able to replace the bearing ,there may be some circlip / snap rings to remove to get it apart.

Number 2 below in the image would be the bearing.

Cheers
Max.