OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Four Stroke Lawn Mower Frames Rover Endevour

Hello brains trust ,
I have a Rover Endeavour model 12A-H2R7333 and I am trying to remove the plate that has the blades attached to it so that I can replace the drive belt .
It’s a 16mm bolt and I just need confirmation that it’s a right hand thread before I break it .
It isn’t marked as a left hand thread but it’s also not coming undone.
Any parts diagram would be helpful too .
Thanks Tom

If it is in to the bottom of the crank it is a right hand thread

Hi Tom ,

The bolt on the crank hub is a lot easier to undo with a rattle gun ,as Norm mentioned from underneath the mower facing the bolt
it will undo in an anticlockwise direction.

Manual here https://www.rover.com.au/attachments/download/file/id/249

Cheers
Max.

Thanks .
Much appreciated