OutdoorKing Repair Forum Forums Repairs and Maintenance Questions On Ride On Mowers Questions on Greenfield Ride On Mower Frames Fastcut 34 muffler

I’ve just bought a Fastcut 34 with a Briggs 22hp twin. The mufflers have seen better days but I can’t find anyone online with stock. Any suggestions? Thanks.

Hi Redfin

I did see one here https://www.smallenginewarehouse.com.au/products/briggs-22hp-27hp-v-twin-vertical-pro-series-muffler


Cheers
Max.

Thanks but mine has two small ones and the pipes are longer. Greenfield part GT 20061.

You won't find one under a greenfield part number, unless someone has old stock. But, they are just a briggs and stratton lo tone, part number 691874 or similar. I am not 100% the variation they used. These can be found for $40-50 if you shop around.

And then if all fails you might be able to fit one of these to each cylinder. Require a bit of fabrication but not too hard.
https://www.ebay.com.au/itm/201043747693?

Thanks Nath, that’s the one. Don’t know how I missed it.

Thanks Norm, hopefully can get the one Nath posted.

All good just always have to have an option to solve a problem on them

Just in case the question every comes up again…

New mufflers fitted. I realise why I couldn’t find them originally - Briggs don’t use them on the twins but Greenfield have used one per cylinder. The new ones needed to be modified slightly to cut off a protruding pipe. Work well.

Looks great and just bolt on