OutdoorKing Repair Forum Forums Finding and Swapping Wanted Victa Twin Rings

Ive got the impossible ask here , Am looking for a set of rings 0.040" oversize , would anybody know where i could get a set or have a set , for a Victa Twin ,

When you know let me know I'm in the same vote

You guys may have to resort to finding an engine with approximately 48mm bore (think the twin is 48.05), same ring ring thickness, then adjust the ring gap as required with a dremel.
Not ideal, but what can you do.

Quick search shows some yamaha and kwaka's have bores around it

supper valuable info ,

Good Morning all,

Rings are available from Nornda Automotive who were also known as JP Pistons, I have had STD rings made in the past and a friend very recently placed an order for more. They should do oversized as well, I have never seen a Twin with oversized rings yet. They never lasted that long in service.

https://www.norndaautomotive.com.au/jp-pistons.html

Give them a call

Thanks for this great info Paul , will give them a call and see what they can do , i see they make pistons as well ,