I have picked up a G4 carby with the throttle control dial on it, and wondered if I could fit this to a Power Torque engine? I am pretty sure none of these were ever fitted to a P/T so thought I would check before I gave it a shot.
Hi Sapper, I mix and match all the LM/G4 bits when I modify the carbs, I don't use the black poppets and usually don't use the cam although I did use quite a few of them when I first started modifying them, but it means I had to fit an adjuster screw into the cam to come up against the screw I use in place of the kill switch abomination
