|
3 members (NormK, Buckets, Bruce),
5,480
guests, and
738
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Apr 2014
Posts: 2
Novice
|
Hi I am wondering if anyone can let me know where I can get my reel and bedknife ground in the hunter valley NSW? Any help would be appreciated cheers 
|
|
|
|
|
Joined: Jul 2005
Posts: 6,362 Likes: 11
Administrator - Master Technician
|
Hi Scotty84, and a warm welcome to the forum. It's great to have you aboard.  If you contact your closest Bowling Club and speak to the greenskeeper, ask them where they get their reels and bedknife blades sharpened. They are usually a friendly bunch and will help you with good advice.  Once again,  to OutdoorKing. 
Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member. Kindest Regards, Darryl
|
|
|
|
|
Joined: Apr 2014
Posts: 2
Novice
|
Thanks heaps for that Darryl I will be calling them tomorrow. Cheers scotty.
|
|
|
|
|
Joined: Jun 2014
Posts: 9
Novice
|
I know of a guy in Adamstown who apparently is the bloke to see in the newcastle area
Sb 45
Rover 45
Sb model 38 edger
Atco 1952
Atco 1970
Rover super four 53
|
|
|
|
|
Joined: Jul 2005
Posts: 6,362 Likes: 11
Administrator - Master Technician
|
Hi Izrobboau, and a warm welcome to the forum. It's great to have you aboard, as we all like to learn new things and tinker here. Thankyou for this information, would you be so kind and PM me the name and contact details of this person?. Please contact me HERE Once again Izrobboau, to OutdoorKing.
Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member. Kindest Regards, Darryl
|
|
|
|
|
Joined: Jan 2014
Posts: 4
Novice
|
Hi there Deejay, did you get the name and number of the guy in Adamstown that grinds reels? I need a grind done on a Scott Bonnar model 45 I recently purchased, my location is Newcastle and any recommendations would be appreciated.
Last edited by OCDirt; 13/10/14 06:32 AM.
|
|
|
|
|
Joined: Jan 2019
Posts: 15
Novice
|
I'm looking for a grind in the Newcastle/Maitland area NSW anyone know of someone nearby?
|
|
|
|
|
Joined: Jan 2019
Posts: 15
Novice
|
|
|
|
|
|
|
Joined: Nov 2013
Posts: 6,938 Likes: 322
Forum Historian
|
I'm looking for a grind in the Newcastle/Maitland area NSW anyone know of someone nearby? Hello Harris, The best advice I have seen on these forums is to mosey down to a local bowls or golf club and ask them. It is important that you deal with a grinder rather than an agent of a grinder. They must do the work in-house. Hope this helps.------------------------------ Jack
|
|
|
|
|
Joined: Aug 2011
Posts: 2,998 Likes: 16
Former Moderator
|
Agents are just tacking over $100 onto a job that they don't even do.
Most of Adelaide's mower shops are doing just that and are merely sending the work to Adelaide's major cylinder grinder in Pooraka to be done.
As Jack has suggested just go to your local Bowling / Croquet club and ask who's doing theirs and that will be your answer.
Cheers,
BB.
I live a 24 Hour lifestyle, but every now and again I seem to fall asleep, well at least that's what my wife tells me.
|
|
|
|
Forums144
Topics12,731
Posts106,685
Members17,980
| |
Most Online40,124
Apr 13th, 2026
|
|
|
|
