OutdoorKing Repair Forum Forums Restoring, Customising and Modifying Reel-Type Mowers 1950 14” atco

Hi can anyone tell me what size and thread
the fuel tap is on a 1950 14” Atco
cheers Ken

Hi Ken,
Don't know if this helps but you could contact them and see what they say.
https://www.ebay.com.au/itm/Fuel-Ta...ffolk-Webb-Mowers-1-4-KT041/182426043168

Ken, the old Atco tank I have from a early 60s model has the same thread as the standard victa 2 stroke fuel tap - my alroh with tecumseh engine also has the same thread, so must be standard.

I believe 1/8 pitch, 1/4 inch size - but on 80% sure on that from memory

Ok thanks Tyler for the info I’ll have to find a
Brass fuel tap from somewhere, I would have
Brought one from George at Villiers parts in UK
But the web site is down for some reason
Cheers Ken

Hi All.
I thought the Victa tank thread was an 1/8 BSP Tap. ( the same as a lot of other mowers ,motor bikes ,etc.)

Cheers
Max.