Another thing I dislike with those Tornado type bodies is that the bodies rust out very easily in places none of the standard PT's rust. I think what they did was reduce the thickness of the steel to compensate for the more material required to press out a bigger body. The only reason I repair these is if I end up with a long shaft motor that I want to use up. I could make up 20mm spacers so I could jack it up and put it on a standard base, becomes much of a muchness as I usually have to spend a fair bit of time welding in repair sections where the Tornado body has rusted out, usually on the left hand side between the wheels, not up high in the left hand corner as the standard base does
