Millsy not sure what you are chasing and what you want these mowers for . For me they are way to expensive but for the average punter they may be alright to use as a mower. My problem is when I get a Powertorque it can take me up to 2 days to strip, repair the base,paint and rebuild them and get them to the working condition so I can sell them. My biggest issue is finding a good set of wheels with tread on them and getting the time to repair/weld up the bases, I think I have 10 sitting there beside the welder at the moment waiting for me to get a few moments to fix them. BB while I am not a fan of the handelbar mounting/ bolting set up it is what it is and once repaired properly it can be a reasonably good unit, not the best but if the owner just puts a spanner on the nuts occasionally they won't flop around and that is what causes most of the damage. I am thinking of actually welding the inner half round strengthener to the chassis to see if that helps solve the problem, then fish oil the area to stop any further rust. I already fish oil the inner left hand side which is where they always rust.
Just after a well thought out mower with no major issues. 2 stroke, powertorque and somewhat not a common chinese junk mower lol. If you have anything in mind pm me or have recommendation of which models to chase. In no rush and will be used for residential lawns or when the 20 inch supercut tires me out!
