Quote
Are these any use, might have to machine the wheels to fit them but cheap enough to start with
Hi Norm
This might be an option if the mower was a daily driver.
But thrust spacers would need to be made to accommodate the correct
side-thrust.

Paul's solution - for a reproduction kit - is best here ... and it
includes those hard to find red caps and hardware.

The repro kits seem to have fully sealed bearings too.
The originals required grease packing...

[Linked Image]

I can't answer this bit:
The original parts catalogue (thank you Forum!) lists the Inner as Part # 2518, and the Outer as Part # 2519
These bearings seemed identical to me.

Cheers
-----------------
Jack

Last edited by CyberJack; 05/07/17 01:39 AM.