Thanks Jack, didn't know that's what it was for. I spent the afternoon outside cleaning and painting

And the model designation is underneath unlike the KXD which is on the top rear of the base

Pretty happy with how it's coming along particularly as it was very rusty, some parts I am unable to replace so they bare their scars but with a derustuse and fresh paint :-) I have bought new bolts etc from Bunnings for the frame but will have to go to a specialist supplier to get some UNF nylock nuts for the axle brackets.

I will have to make some replacement stub axles and also the handle bar rod that goes through the side supports. It was totally rusted away.

It's the rod below the rubber cover wire in the pic below

Attachments
paul_sc_08.jpg (40.17 KB, 27 downloads)
paul_sc_09.jpg (35.85 KB, 26 downloads)
paul_sc_10.jpg (34.31 KB, 26 downloads)
paul_sc_11.jpg (34.71 KB, 26 downloads)
paul_sc_12.jpg (36.78 KB, 26 downloads)
paul_sc_13.jpg (26.75 KB, 26 downloads)
paul_sc_14.jpg (28.79 KB, 26 downloads)
Last edited by CyberJack; 18/06/18 11:19 PM. Reason: Image Correction.