Hi All,

Forgive me if I've posted this in the wrong category but I just wanted to put it out there that I am equipped and experienced to sharpen reel mower cylinders and bottom blades/bedknife for the good people of Perth (and others from far if travel or postage is not an issue).

I am a qualified diesel mechanic but got into the sharpening game as a side gig meaning I do this outside of normal work hours (6pm-11pm weekdays and weekends). There is something about binging an edge back to life that does it for me.

Sharpening of cylinder and bed-knife is done off the machines so I would need them removed. If you don't have the know-how to be able to do this yourself then that if fine because I can do that for you also...it will cost a little bit more though.

Currently my prices are:

*Cylinder sharpen only - $40
*Bedknife sharpen only - $25
*Cylinder and bedknife sharpen - $60
*Remove, sharpen, refit and set cylinder/bedknife - $110

I hope to hear from you.

Mo,

P.S I've included some pictures to give you an idea of what I use to do the task. Hopefully it attaches. [Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]