Is this something that any SB45 owners on here would be interested in ? I could get it done for probably about $75 per side or deck (i would need to check that first but would be close that). I could have them done with no drilling required and i can't see the need for any welding either. The deck could be a two piece item bolted to make it rigid. The catcher mounts could be replaced with stainless bolts or rivnuts and the height adjuster could be laser cut / folded and bolted to the side plate. As you said a 1 off might not be worth it but if more then one would probably be ok as the draw / design fee is $50 per item. I have one of the 20" apart and could go ahead with it if anyone else is interested...
