OutdoorKing Repair Forum Forums Restoring, Customising and Modifying Reel-Type Mowers SB 45 Full Restore - Rookie

Hi Kenny,

And my on a good score there as well!
Our Inline Uploader will allow you to post 10 pics at one time, I have re-posted those that have not appeared in your post, here for you.

Re: your machine, it is a nice twin rail, Series 2 Scotty, The sprockets and chains look to be in nice serviceable condition....
The cylinder reel, in my opinion, is serviceable and has plenty of life left in it and does not need replacing....but I agree with Rolla, have the bent blades straightened prior to powder-coating and sharpening.
New cylinder reel bearings will probably be required, but they are not expensive and are essential in achieving the correct reel to bedknife adjustment.

The model, type and code may be hard to see as they are stamped into the metal air cowling of the Briggs and have then been painted over, and are adjacent to the carby intake manifold.

The Scott Bonnar decal on the chain case has been damaged beyond repair, but does confirm my knowledge that was white lettering with black edging.

The catcher will need some panel beating, but is in reasonable nick for its age.
The inner cutter clutch half has been replaced, and that is a good thing...they are a much better design.
The plastic thrust pad looks serviceable as well.

All round, a good buy, a machine that will restore beautifully, and will give you years of mowing pleasure.
Well done, mate!