Originally Posted by tiger
Tired of stuffing around with the old one, am after a G3 carby with governor attached.

Try these steps for the G3 Carby:

1. Check main 'O' ring on the brass jet.

2. While main jet is out check that the two holes are clear.

3. Make sure that the seat has not moved otherwise it will flood.

4. Check governor vane is in the correct position.

Once you explain a bit more I will give you some more tips to fixing a G3 carby, cheers2

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.