Hi All,

Adam from Melbourne here.

Recently borrowed an older model Greenfield ride on off my Father. long story short, the drive belt broke.

So I took the broken belt to a mower shop, they measured length and section and supplied me a new belt ($52.30)

So... fast forwad to today and I am fitting the new belt. I have fitted it as would make sense to me, however it appears to be 'way' too long. With it fitted up and the tensioner all they way down, I can still pull the belt about 50 - 60mm up off the large drive pulley...

Please review the pics and let me know if I am a complete doofus, or maybe I have been supplied the incorrect belt?? I realise that the plastic pulley is worn (see pic) but not enough to generate the slack that this belt has. Also note that I pulled the belt snug by hand for the photos to illustrate where it is running.

Many thnaks for heis great forum smile

p.s Belt # is A138 (as in 1.38m in length)

Cheers, Adam.



new belt as fitted to..

Drive/Clutch pulleys


[Linked Image from i515.photobucket.com]



guide pullys under mower deck


[Linked Image from i515.photobucket.com]


[Linked Image from i515.photobucket.com]

Last edited by Torker Man; 11/12/11 10:49 AM.
Victa 2 strokes as board track bicycle power!