Ok i have taken some photos but don't know how to load them so I will try to explain what I have done, new B& S 13.5hp model # 21B977 mounted on my Rover Ranger XC( with a few modifications to rear guards)from the old moter on the left side sitting inthe seat I have a yellow wire with a green stripe which I connected to the large red wire from the alternator The small black wire from the alternator I think is for 12v power (lights etc which there are none )I have a red wire with a white stripe comming from the mower harness & would like to know where it will go to the motor, from the other side there is a grey wire & a black wire comming from the fuel solenoid and the black wire goes to earth on the block, the grey wire goes to a twin connector and there is a black wire connected, where do these wires go to please
Laurie
Last edited by crackers; 12/11/10 10:32 AM.
